Siemens KNX Switch Actuator N 567-11
Siemens KNX Switch Actuator N 567-11, 8 A, 8 x 230 V AC - with integrated 8-bit scene control, unchanged switching state of outputs, time functions (On/Of delay, Timer mode, Night mode) - 5WG1 567-1AB11
| | Siemens Switch Actuator N 567/11, 8 A, 8 x 230 V AC Features |
 | Scene control functions |
| Timer functions |
| on/off deley function |
| With its eight relay contact outputs (channels) it can switch eight groups of electrical consumers independently of each other |
| Behavior in the event of system voltage failure: Unchanged switching state of outputs |
| The connection to the bus line can be carried out either via a bus terminal block or by a contacting system to a data-rail installed in the DIN-rail |
| | Technical details |
| Power supply:- KNX bus voltage: via the bus line
- ElB bus current: 5 mA (only half a standard bus load !)
- Actuator electronics:
-- integrated power supply for AC 230V, +10%/-15%, 50Hz mains connection: 2-pole (N, L for channel A)
-- power consumption: max. 1,1 W |
| Inputs/outputs:- 8 switching outputs, outputs B...H floating: rated voltage: AC 230V, 50Hz
-- rated current: 8A per relay contact (resistive load)
-- switching cycles: > 80.000 with cos q = 1 and I = 8A |
| Operating elements:- 1 learning push button: for toggling between normal mode I addressing mode
- 1 push button: for toggling between bus mode I direct mode
- 8 push buttons: for direct operation (toggling) of the 8 actuator outputs, independent of the KNX |
| Display elements:- 1 red LED: for checking the bus voltage and for displaying normal mode / addressing mode
- 1 green LED: for displaying the 230V operating voltage
- 1 yellow LED: for displaying direct mode / bus mode
- 1 red LED per push button for direct operation: for displaying whether the output is switched on or off |
| Connections:- Mains and output circuits: plug-in terminals for mains connections and outputs Insulation strip length 9... 10mm
The following conductor cross-sections are permitted:
-- 0.5... 2.5 mm2 single-core
-- 0.5... 2.5 mm2 finely stranded with connector sleeve
-- 1.5 mm2 finely stranded, untreated (max. ampacity 6A)
- Each L-conductor connected to the N 567/11 must be fused with a circuit-breaker of characteristic B or C for a max. nominal current of 10 A!
- KNX bus line:
-- Pressure contacts on data rails
-- Screwless bus terminal, 0.6 ..... 0.8 mm single-core, insulation strip length 5 mm |
| | Package |
| Unit | 1 |
| Back Box | |
| Fixing | Din Rail |
| Warranty | 12 Months |
| VAT | UK VAT @ 17.5% will be added to the total price at Checkout |
| Delivery Time | Stock Item |
| UK Delivery | Free UK Delivery on orders over £250.00 |
| EU Delivery | Free EU Delivery on orders over £400.00 |
