Siemens KNX DALI Dimming Actuator N 525E
Siemens KNX Switch Dimming Actuator N 525E DALI - 8 x DALI, 8 ECG per output, integrated 8-bit scene control, configurable behavior in the event of system voltage failure and recovery, switching/dimming options - 5WG1 525-1EB01
| | Siemens Switch /Dimming Actuator N 525E DALI Features |
 | Configurable behavior in the event of a bus power failure / recovery |
| Configurable behavior in the event of system voltage failure / recovery |
| Switching functions (ON/OFF possible over brighter/darker dimming, configurable starting value) |
| Dimming functions (Brighter/darker, adjustable dimming time, brightness limitation, adjustable min. dimming value/max. dimming value) |
| Integrated 8-bit scene control (16 Scenes to be integrated per DALI output) |
| Timer functions (On/Off deley, night mode) |
| | Technical details |
| Power supply:- KNX bus voltage: via the bus line
- Actuator electronics:
-- via AC 230V +10%/-15%, 50Hz
-- power consumption: max. 6 W |
| Inputs/outputs:- Mains connection: 2-pole (N, L)
- 8 DALI outputs:
-- max. 8 DALI devices per DALI output with s 8 kOhm input impedance per device can be connected
-- DALI bus voltage: approx. DC 16 V, floating, short-circuit-proof |
| Operating elements:- 1 learning push button: for toggling between normal mode / addressing mode
- 1 push button: for toggling between bus mode / direct mode
- 4 x 2 push buttons: for direct operation (switching and dimming) of 4 actuator outputs, independent of the KNX |
| Display elements:- 1 red LED: for checking the bus voltage and for displaying normal mode / addressing mode
- 1 green LED: for displaying the 230 V operating voltage
- 1 yellow LED: for displaying direct mode / bus mode
- 1 red LED per push button for direct operation: for displaying whether the output is switched on or off as well as by 1 Hz flashing if an error is present (e.g. a lamp failure) |
| Connections:- Mains and output circuits:
Plug-in terminals for mains voltage and DALI outputs, insulation strip length 9 ... 10mm
- The following conductor cross-sections are permitted:
-- 0.5 ... 2.5 mm2 single-core or
-- 0.5 ... 1.5 mm2 finely stranded with connector sleeve
- The supply cable to the N 525E must be fused with a circuit-breaker of characteristic B or C for a max. nominal current of 6 A!
- KNX bus line:
-- Pressure contacts on data rails,
-- Screwless bus terminal, 0.6 ... 0.8 mm single-core, insulation strip length 5 mm |
| | Package |
| Unit | 1 |
| Back Box | |
| Fixing | Din Rail |
| Warranty | 12 Months |
| VAT | UK VAT @ 17.5% will be added to the total price at Checkout |
| Delivery Time | Stock Item |
| UK Delivery | Free UK Delivery on orders over £250.00 |
| EU Delivery | Free EU Delivery on orders over £400.00 |
