Siemens KNX Blind Actuator ER N 524 - 5WG1 524-1AB01 - siemens knx building automation system | knxstore EU online shop

- Move to safety position
- Locking in this position for as long as alarm is active

- Over position data (8-bit value)
- Travel to end position, stopping, stepwise adjustment

- Bus voltage: via the bus line
- N 524 electronics: integrated power supply unit for AC 230V(+10%/-15%), 50Hz
- External DC voltage for motor supply: 6V, 12V or 24V (to be protected by a fuse 4A T)

- 1 learning push button: for toggling between normal mode / addressing mode
- 4 x 2 push buttons: for local operation of the DC drives, independent of the KNX

- 1 red LED: for checking the bus voltage and for displaying normal mode / addressing mode
- 1 green LED: for displaying the 230 V operating voltage

- mains connection: 2-pole (L, N), for supplying the internal electronics
- Extermal DC voltage: 2-pole (+, -), for supplying the drives
- 4 drive outputs (relay contacts): 4 x 2-pole
-- Rated voltage: DC 24 V
-- Rated current: max. 1 A per output
-- Switching cycles: >20.000

- Load circuit
Screw terminals for mains voltage, DC voltage and drives
The following conductor cross sections are permitted:
-- 2 x 0.5... 2.5 mm2 single core or
-- 2 x 0.5... 1 5 mm2 finely-stranded with connector sleeve, insulation strip length 9 10 mm
- Bus line: screwless bus terminal 0.6 ... 0.8 mm single core, insulation strip length 5 mm