Siemens KNX Binary Input Device N 263E-01 - 5WG1 263-1EB01 - siemens knx building automation system | knxstore EU online shop

- 1-pushbutton dimming
- 2-pushbutton dimming with stop telegram (4 bit)

- 1-pushbutton shutter/blind control
- 2-pushbutton shutter/blind control
- Short/long button press can be evaluated

- Store and call up scene, 8-bit
- Store and call up scene, 1-bit in conjunction with scene module

- Rising edge
- Falling edge
- Rising and falling edge
- Short/long button press can be evaluated

- Rising edge
- Falling edge
- Rising and falling edge

- Bus voltage: via the bus line
- Bus current: 5 mA (only half standard bus load!)
- Electronics:
-- integrated power supply for AC 230V, +10%/-15%, 50 / 60 Hz
-- Mains connection: 2-pole (N, L)
-- power consumption: max. 1.6 W

- 1 learning pushbutton: for toggling between normal mode / addressing mode

- 1 red LED: for checking the bus voltage and displaying normal mode / addressing mode
- 1 green LED: for displaying the 230 V operating voltage
- 1 red LED per binary input for status display: LED = ON: voltage is present at the input

- 8 inputs (with 250V basic insulation against each other and enhanced insulation against the bus)
- lnput voltage: AC/DC 12V ... 230V
- Input current: at max. AC 253 V: typically 1.5 mA (RMS), at max. DC 253 V: typically 3.0 mA
- Input signal delay:
-- at rising edge of input signal: max. 60 ms at DC, max. 10O ms at AC
-- at falling edge of input signal: max. 140 ms at DC, max. 100 ms at AC
- Input signal on-time: at least 60 ms at DC, at least 100 ms at AC
- Input signal off-time: at least 140 ms at DC, at least 100 ms at AC
- Max. detectable switching frequency: 5 Hz
- Input function: can be selected
- Max. length of connecting cable: lOO m:

- Mains connection and inputs:
-- Plug-in terminals, insulation strip length 9...l0 mm
- The following conductor cross-sections are permitted:
-- 0.5 ... 2.5 mm2 single-core
-- 0.5 ... 2.5 mm2 finely stranded with plug connector, sea led crimp connection
-- 0.5 ... 1.5 mm3 finely stranded, with connector sleeve
-- 1.0 and 1.5 mm2 finely stranded, untreated
- KNX bus line:
-- Pressure contacts on data rail,
-- Screw-less bus terminal, 0.6 ... 0.8 mm single-core, insulation strip length 5 mm