Siemens KNX Room Temperature Regulator UP 237
Siemens KNX Room Temperature Regulator UP 237 - carbon metallic, 5 LEDs to display the current operating mode, two-level heating or cooling, temperature adjusting via a rotary button on the controller and via the EIB - 5WG1 237-2AB21
| | Siemens Room Temperature Regulator up 237 I S,CA Features |
 | Integrated room temperature sensor |
| Control can be set as a two-point control and/or continuousaction control (P or PI algorithm), for heating mode only, for cooling mode only, for heating and cooling mode |
| Comfort, standby, night, frost and heat protection operating modes, which can be switched via KNX |
| Presence pushbutton to locally switch between comfort and standby mode and to extend comfort mode after operating night mode |
| Adjusting the room temperature setpoint offset for comfort mode can be set via a rotary button on the controller and via the KNX |
| Basic setpoint of the room temperature for comfort mode which can be set via the KNX |
| Adjustable dead zone between the heating setpoint and the cooling setpoint for comfort mode |
| Two-level heating or cooling |
| Output of the control variable(s) either as an On/Off switch command or as a positioning command in the range of 0 ... 100 % |
| Mounting on a UP 110 or UP 114 bus coupling unit |
| 5 LEDs to display the current operating mode and, if necessary, the dew point alarm |
| | Technical details |
| Power supply via the flush-mounted bus coupler |
| Temperature measurement:- Measuring range: 0 ... + 40 °C
- Resolution: 0.08 K
- Accuracy of the sensor temperature: ± 1.0 K under reference conditions, ± 2.0 K under ambient conditions and in measuring range |
| Operating elements:- 1 rotary button for manual adjustment of the setpoint (control range dependent on the parameter setting)
- 1 presence button for toggling between comfort and standby mode and vice versa |
| Display elements:- 3 green LEDs for the current operating mode (comfort, standby, night reduction)
- 1 red LED for frostlheat protection
- 1 yellow LED for dew point alarm |
| Connections:- 10-pole plug connector (PEI): for connection to the flush-mounted bus coupler |
| | Package |
| Unit | 1 |
| Back Box | |
| Fixing | Din Rail |
| Warranty | 12 Months |
| VAT | UK VAT @ 17.5% will be added to the total price at Checkout |
| Delivery Time | Stock Item |
| UK Delivery | Free UK Delivery on orders over £250.00 |
| EU Delivery | Free EU Delivery on orders over £400.00 |
