Siemens KNX Motion Detector IP 55
Siemens KNX Motion Detector IP 55, anthracite - surface mounted (outside or inside) device, with KNX interface, detection of heat radiated by body - 5WG1 251-3AB21
| | Siemens Motion Detector IP55, anthracite Features |
 | It can be set separately for the beginning and end of detected movements, whether these are to be reported over the bus and whether a further telegram is also to be sent. |
| By using an infrared remote control which is also available as an accessory (5TC7 902), a user can conveniently set, by means of the IR receiver incorporated in the motion detector, as well the detector's mode (test mode, brightness-dependent or brightness-independent mode, standard mode, pulsed mode) as the brightness threshold and the delay time, independently. |
| A special mounting base is available for this purpose as an accessory (5TC7 900 in titanium white and 5TC 9o1 in anthracite) |
| The detector electronics are powered via the bus voltage. |
| The factory setting of the mode in the as-delivered state is brightness-dependent motion detection with a brightness threshold of 7 lux and a delay time of 2 minutes. |
| | Technical details |
| Sensor:- Capture zone: 2900
- Mounting height: 2 - 4 m, ideally 2.50 m
- Range (mounting height 2.50 m, ÷22°C): approx. 16 m
- Dawn/twilight sensor: 0.5 - 2000 lux
- Delay time 5 seconds - 30 minutes
- Pulse mode 1 second ori, 9 seconds OFF
- Test mode: Brightness-independent mode, after-run time 2 seconds |
| Power supply:- Bus voltage: via bus line
- Bus current: 11 mA |
| Operating elements:- 1 commissioning button (see figure 1): for switching over between normal mode / addressing mode
- 2 buttons (S1 and S2, see figure 2): for local setting of operating mode, brightness switching threshold and after-run time of the motion detector, independent of the bus |
| Display elements:- 1 red LED: for display of normal mode / addressing mode (off / on)
- 1 red LED (below the lens of the motion detector): for confirmation after operating mode and parameter settings |
| Connections:- Bus connection: screw-less bus terminal, single-wire 0.6...0.8 mm, insulation strip length 5 mm. |
| | Package |
| Unit | 1 |
| Back Box | |
| Fixing | Din Rail |
| Warranty | 12 Months |
| VAT | UK VAT @ 17.5% will be added to the total price at Checkout |
| Delivery Time | Stock Item |
| UK Delivery | Free UK Delivery on orders over £250.00 |
| EU Delivery | Free EU Delivery on orders over £400.00 |
